A lot of homeowners booking design consultations in your area don’t know what to expect on install day, and that uncertainty is the #1 source of friction during a project. At Undercover Systems of Colorado, we’ve mapped out every stage of our process so there are no surprises: from the first site visit to final walk-through. Here’s exactly what happens, how long each step takes, and what you should see a professional team doing at every stage.
Step 1: Site Visit and Assessment
Every design consultations project Undercover Systems of Colorado takes on in your area starts with a physical site visit. We measure the space, check the substrate, test for moisture, and talk through how you actually use the space.
This visit is free and honest — if design consultations isn’t the right solution for your situation, we’ll tell you.
Step 2: Proposal and Scheduling
After the visit, we send a written proposal that itemizes prep, materials, finish, and timeline. You’ll know exactly what’s included before you sign.
“Scheduling depends on our current backlog and the seasonal weather window, but we give realistic dates — not best-case promises.”
Scheduling depends on our current backlog and the seasonal weather window, but we give realistic dates — not best-case promises.
Step 3: Surface Preparation
On the first day of work, our crew performs full substrate prep: diamond grinding, crack repair, moisture control if needed, and a final vacuum before materials go down.
Prep is the single biggest share of the job in both time and cost. It’s also the reason our finishes hold up.
Step 4: Installation
Coats go down in sequence — base, build, decorative layer if applicable, topcoat — with the right dwell time between each. The crew works clean, and we protect adjacent areas from overspray or splash.
A typical design consultations install in your area takes 1–3 days depending on system complexity and square footage.
Step 5: Cure and Walk-Through
After the topcoat, the surface cures for 24–72 hours before any traffic returns. We do a final walk-through together, explain care and maintenance, and leave written instructions.
If anything isn’t right, that’s the time to flag it — not weeks later.
Frequently Asked Questions
Do I need to leave during the install?
For most residential design consultations work in your area, you can stay in the home — we just seal off the work area. Cure time may require staying off the surface for 24–72 hours.
What if I don’t like how it’s turning out?
Flag it immediately. We address issues mid-job whenever possible. Communication during install is easier than corrections later.
How soon can I use the space after?
Light foot traffic at 24 hours, full use at 72 hours for most systems. We’ll confirm the exact times for your install.
Ready to talk about your project?
Serving your area and the surrounding area. Get a free quote from Undercover Systems of Colorado today.